Evaluación de la influencia de las condiciones del proceso de decapado de la empresa Polyuprotec en el contenido de metales pesados del ácido agotado
Cargando...
Archivos
Fecha
2014
Director de trabajo de grado
Título de la revista
ISSN de la revista
Título del volumen
Editor
Universidad de La Salle. Facultad de Ingeniería. Ingeniería Ambiental y Sanitaria
Altmetric
Código QR
Descripción
El presente proyecto tiene como objetivo principal determinar la influencia de las condiciones del proceso de decapado de la empresa Polyuprotec en el contenido de metales pesados presentes en el ácido agotado (Ácido Clorhídrico usado). Para cumplir estos objetivos, se desarrolló de una metodología compuesta por tres fases, en las cuales se realizaron actividades de diagnóstico de las condiciones del proceso de decapado, caracterización del residuo líquido generado para determinar el contenido de metales pesados y establecer así el aporte por parte del proceso mencionado, y, ensayos de decapado a nivel de laboratorio para establecer la influencia del tiempo de decapado por peso de material en el contenido de metales en el ácido agotado y la influencia de la relación acido/agua de enjuague en el mismo. Se utilizaron los resultados obtenidos en estos ensayos y caracterizaciones parapoder llegar a la propuesta de alternativas de reducción del aporte de metales en el proceso de decapado, con el fin de obtener un efluente cero, generando así reducción de costos de disposición para la empresa. Finalmente se realizó un análisis aproximado de los costos que traería consigo la puesta en marcha de las alternativas y sugerencias propuestas. Cabe mencionar que la presente investigación hace parte de un macroproyecto, en el cual están involucradas dos investigaciones más encaminadas a la valoración del ácido agotado como coagulante en tratamientos de agua residual industrial
This project's main objective is to determine the influence of process conditions pickling company Polyuprotec in the content of heavy metals in the spent acid (Hydrochloric acid used). To achieve these objectives, we developed a methodology composed of three stages, in which we made different activities like: diagnostic of the pickling process conditions, characterization of liquid waste generated to determine the content of heavy metals and thus to establish the contribution by the process mentioned, and picking tests on a laboratory level to establish the influence of the pickling time by weight of material in the content of heavy metals in the spent acid as well as the influence of the acid / water ratio at the same rinsing . The results obtained in these tests and characterizations were used to arrive at the proposed alternative mitigation contribution of metals in the pickling process in order to obtain a zero effluent, thereby generating reducing disposal costs for the company. Finally an approximate cost analysis that would result in the implementation of alternative proposals and suggestions were made. This research is part of a larger project, which are involved other research to assess the spent acid as a coagulant in water treatment for industrial residual
This project's main objective is to determine the influence of process conditions pickling company Polyuprotec in the content of heavy metals in the spent acid (Hydrochloric acid used). To achieve these objectives, we developed a methodology composed of three stages, in which we made different activities like: diagnostic of the pickling process conditions, characterization of liquid waste generated to determine the content of heavy metals and thus to establish the contribution by the process mentioned, and picking tests on a laboratory level to establish the influence of the pickling time by weight of material in the content of heavy metals in the spent acid as well as the influence of the acid / water ratio at the same rinsing . The results obtained in these tests and characterizations were used to arrive at the proposed alternative mitigation contribution of metals in the pickling process in order to obtain a zero effluent, thereby generating reducing disposal costs for the company. Finally an approximate cost analysis that would result in the implementation of alternative proposals and suggestions were made. This research is part of a larger project, which are involved other research to assess the spent acid as a coagulant in water treatment for industrial residual
Palabras clave
Decapado, Coagulante, Metales pesados, Ácido Clorhídrico, Pickling, Coagulant, Heavy Metals, Hydrochloric Acid