Tutor 1

Balda Ayala, Roberto

Resumen

El campo del tratamiento de aguas residuales está actualmente orientado a la búsqueda de nuevas tecnologías que mitiguen y amortigüen la desenfrenada propagación de factores antrópicos contaminantes del recurso hídrico, lo cual se propicia a mayor escala, con la producción y los vertimientos de efluentes industriales, pues las características fisicoquímicas de este tipo de aguas demandan unidades de tratamiento avanzado, donde los reactores biológicos de membranas (MBR) en las últimas dos décadas, se han adaptado a los requerimientos rigurosos de calidad exigidos por normativa, no sólo para vertimiento si no para reúso, al consolidarse como un sistema que integra membranas de micro y ultrafiltración con la oxidación biológica aerobia. Asi pues, se ejecutó el diseño y construcción de un sistema MBR donde el volumen se obtuvo a partir de la modelación matemática acorde a la cinética biológica de desnitrificación, nitrificación y remoción de materia orgánica de efluentes producidos por una industria farmacéutica, de modo que se realizó la caracterización fisicoquímica y se modeló con base en ello, logrando el ensamble de una unidad compacta y adecuada con equipos, accesorios y un tablero eléctrico para la automatización de la evaluación a escala piloto del sistema MBR. El sistema piloto se construyó para almacenar 560 Litros y su diseño consistió en una cámara anóxica, un compartimiento de aireación o reactor de 370 Litros de volumen total para el licor mezclado con un módulo de membranas de tipo placa plana sumergidas y una cámara destinada para el efluente tratado. Además, se planteó un sistema lógico de control que permite el monitoreo e intervención de la respectiva operación

Resumen en lengua extranjera 1

The field of wastewater treatment is currently oriented to the search for new technologies that mitigate and cushion the unbridled spread of anthropic pollutants into the water resource, which is encouraged on a larger scale, with the production and discharge of industrial effluents, as the physico-chemical characteristics of this type of water demand advanced treatment units, where membrane biological reactors (MBR) in the last two decades, have adapted to the rigorous quality requests required by regulations, not only for discharge into a water body but also for reuse, by consolidating as a system that integrates micro- and ultrafiltration membranes with aerobic biological oxidation. Thus, the MBR system design and construction was developed. The volume was obtained from the mathematical modeling according to the biological kinetics of denitrification, nitrification and removal of organic matter from effluents produced by a pharmaceutical industry, so that the physico-chemical characterization was carried out and modeled based on it, achieving the assembly of a compact and suitable unit with equipment, accessories and control panel for the automation of the pilot scale evaluation of the MBR system. The pilot system was built for a 560 liter capacity and its design consisted of an anoxic chamber, an aeration compartment or reactor of 370 L of total volume for mixed liqueur with a module of flat sheet submerged membranes and a chamber for the treated effluent. In addition, a logical control system was proposed to allow the monitoring and intervention of the respective operation

Palabras clave

Reactor biológico de membranas, Industria farmacéutica, Escala piloto, Ultrafiltración, Lodos activados, Membrane biological reactor, Pharmaceutical industry, Pilot scale, Ultrafiltration, Activated sludge

Tipo de documento

Trabajo de grado - Pregrado

Licencia Creative Commons

Creative Commons Attribution-Noncommercial-No Derivative Works 4.0 License
This work is licensed under a Creative Commons Attribution-Noncommercial-No Derivative Works 4.0 License.

Fecha de elaboración

2021

Programa académico

Ingeniería Ambiental y Sanitaria

Facultad

Facultad de Ingeniería

Publisher

Universidad de La Salle. Facultad de Ingeniería. Ingeniería Ambiental y Sanitaria

Compartir

COinS