Tutor 1

Bermúdez, Maria Luisa

Resumen

En este proyecto de grado se presenta un prototipo capaz de optimizar y controlar todo el proceso del subsistema de energía para las estaciones de la Red Sismológica Nacional. El subsistema esta conformado por un cargador de batería que actúa también como fuente de toda la estación y de un banco de baterías estacionarias de Pb-Acido. El proceso se centra en un control de carga de baterías y de alarmas del sistema, además de un proceso de diagnostico que puede realizarse con el usuario a través de un software. El control lo realiza un microcontrolador que es el cerebro del sistema, el entorno digital esta completamente optoacoplado del entorno de potencia eliminado así problemas de sobrepicos de voltaje o corriente que circulen por el cargador y además se eliminan los problemas de ground loop. El control de carga es capaz de ofrecer un volltaje regulado, limitando la corriente para que no se sobrepase la capacidad del cargador, además de un control de arranque suave cuando se haya presentado descargas profundas de la batería. Finalmente el control de carga que se implemento es de voltaje constante con limitación de corriente.

Resumen en lengua extranjera 1

In this project of degree a prototype able appears to optimize and to control all the process of the subsystem of energy for the stations of the Red Sismologica Nacional. The subsystem this conformed by a charger of battery that act also like source of all the station and a stationary bank of batteries of Pb-Acido. The process is centred in a control of load of batteries and of alarms of the system, additionally of a process of I diagnose that it can be made with the user to of a software. The control makes a microcontroller who is the brain of the system, the digital surroundings this completely opto-isolator of the eliminated surroundings of power to problems of sobretips of voltage or current that circulate around the charger and so eliminate the problems of ground loop. The load control is able to offer a regulated voltage, limiting the current so that the magazine capacity is not exceeded, additionally of a control of soft boot when it is presented deep unloadings of battery. Finally the load control that I implement myself is of constant voltage with limitation of current.

Palabras clave

Cargador, Microcontrolador, Optoacoplado, Control

Tipo de documento

Trabajo de grado - Pregrado

Licencia Creative Commons

Creative Commons Attribution-Noncommercial-No Derivative Works 4.0 License
This work is licensed under a Creative Commons Attribution-Noncommercial-No Derivative Works 4.0 License.

Fecha de elaboración

10-2004

Programa académico

Ingeniería en Automatización

Facultad

Facultad de Ingeniería

Publisher

Universidad de La Salle. Facultad de Ingeniería. Ingeniería en Automatización

Compartir

COinS